How To Save Electricity in Water Pump

  • In most houses both water and electricity is wasted while pumping water into the tank. The motor is usually switched off when water overflows from the tank. That much water and electricity is lost.
There is a solution to overcome this problem. Find the time required for the tank to be completely filled. Set the alarm ½ minute before the tank is completely filled. As soon as the alarm rings, switch off the tank.
  • Many things are to be noted while fixing the motor. The twists on the pipe should be reduced maximum. The foot valve should have large diameter and contain lots of pores in it.
  • Rewind motors use more electricity. They use 30% more electricity.
  • The capacity of the motor must be as much required. The motors having more capacity will use more electricity.
  • The position of the pump within the well must not exceed more than 3 meters from the water level. If the motor is placed at great heights it will use more electricity and the amount of water pumped will also be less.

Energy Audit in Home

0 comments:

Post a Comment

 

© 2011 My Energy Auditor - Designed by Mukund | ToS | Privacy Policy | Sitemap

About Us | Contact Us | Write For Us